CAREER

As one of the leading companies in power generation, electrical infrastructures and industrial equipment, JMG Limited is keen on finding diverse professionals that are committed to the success of our clients and company. Working for us means joining a team of talented professionals eager to ensure Strong Customer Service and Customer Satisfaction. 

Please find below the list of our current vacancies and fill the following job application form to submit your resume:

Gas Generator Operator (After-Sales Division) - Lagos

Duties

​Supervise the control panel section. Provide guidance, direction, leadership and mentorship to Electrical Assemblers under his/her supervision.

  • Collect production plan from the Production Planner on weekly basis.

  • Collect production material from store.

  • Assemble electrical control panels. Complete point to point wiring, and install a wide variety of electronic and electro mechanical components.

  • Determine the method and sequence of assembly operations.

  • Read and interpret drawings, blueprints, electrical schematics and wiring diagrams, specifications and work orders to determine materials requirements and assembly instructions.

  • Make sure that the production plans and programs are carried out by the staff.

  • Assure production related needs are accomplished and completed per schedule or production requirements.

  • Inspect work as necessary to ensure quality and accuracy.

  • Report the finished products (panels) to the Production Planner and store.

  • Supervise control panel section.

  • Inspect work as necessary to ensure quality and accuracy.

  • Use safety equipment, and protective devices and equipment.

  • Maintain safe and clean environment by complying with procedures, rules and regulations.

  • Instruct, supervise and transfer skills to control panel workers assigned to him to ensure high level of safety and quality of work.

  • Prepare reports to Production Manager.

 

Minimum Requirements:

  • Electronics Engineering Degree, BE. Electro-Mechanical, Electrical Engineering or equivalent.

  • Other certifications in electronics assembly is a plus.

  • Min 7-8  years of proven work experience in electrical assembly and wiring.

Electrical Assembly Supervisor (Panel Division) – Lagos

Duties

​Supervise the control panel section. Provide guidance, direction, leadership and mentorship to Electrical Assemblers under his/her supervision.

  • Collect production plan from the Production Planner on weekly basis.

  • Collect production material from store.

  • Assemble electrical control panels. Complete point to point wiring, and install a wide variety of electronic and electro mechanical components.

  • Determine the method and sequence of assembly operations.

  • Read and interpret drawings, blueprints, electrical schematics and wiring diagrams, specifications and work orders to determine materials requirements and assembly instructions.

  • Make sure that the production plans and programs are carried out by the staff.

  • Assure production related needs are accomplished and completed per schedule or production requirements.

  • Inspect work as necessary to ensure quality and accuracy.

  • Report the finished products (panels) to the Production Planner and store.

  • Supervise control panel section.

  • Inspect work as necessary to ensure quality and accuracy.

  • Use safety equipment, and protective devices and equipment.

  • Maintain safe and clean environment by complying with procedures, rules and regulations.

  • Instruct, supervise and transfer skills to control panel workers assigned to him to ensure high level of safety and quality of work.

  • Prepare reports to Production Manager.

 

Minimum Requirements:

  • Electronics Engineering Degree, BE. Electro-Mechanical, Electrical Engineering or equivalent.

  • Other certifications in electronics assembly is a plus.

  • Min 7-8  years of proven work experience in electrical assembly and wiring.

Senior Sales Executive (Power Generation Division) – Lagos, Port Harcourt, Ibadan, Kano & Abuja

Duties

Duties

 

  • Promote and sell Company’s products by establishing contact and developing relationships with existing and new prospects and close sales deals.

  • Perform sales activities on major accounts and negotiate sales prices and discounts.

  • Develop sales forecast plan that successfully meets the company's overall business plan and strategy working with the sales team and ensure revenue growth in all company’s products.

  • Assist Sales Executives in establishing personal contact and rapport with key decision makers.

  • Identify, define, collect, and track key business metrics for sales by territory and brands.

  • Prepare Proforma invoices /quotations to customers.

  • Manage product lines to maximize sales revenues and meet corporate objectives.

  • Identify business opportunities by identifying prospects and evaluating their position in the industry; researching and analyzing sales options.

  • Identify product improvements or new products by remaining current on industry trends, market activities, and competitors.

  • Prepare reports by collecting other vendors/competitors’ price lists for comparison.

  • Maintain relationships with clients by providing support, information, and guidance. Resolve customer complaints by investigating problems; developing solutions; preparing reports; making recommendations to Management.

  • Contribute to financial process excellence and increase customer satisfaction by building scores for measurement and conducting customer satisfaction surveys.

  • Prepare and submit periodic sales reports to the Branch Manager.

  • Enhance staff accomplishments and competence by planning delivery of solutions; answering technical and procedural questions for less experienced team members; teaching improved processes; mentoring team members.

  • Maintain professional and technical knowledge by attending trade fairs and related exhibitions.

  • Collaborate with Branch Sales Manager to establish and control budgets for sales promotion and trade show expenses.

Minimum Requirements:

  • Graduate, Business Administration or equivalent. B.E-Electrical / Mechanical would be preferred.

  • MBA or Master’s Degree is a preferred.

  • Min 5-7 years of experience in the sales field of Industrial generator Products

Generator Assembly Supervisor (Production Division) – Lagos

Duties

Oversee the planning, scheduling and execution of work with all team members to produce quality products and deliver it on time. Responsible for development and implementation of operating procedures and continuous improvement programs.

 

  • Supervise the planning, scheduling and implementation of work with all assembly team members to produce high quality products and deliver it on time.

  • Accomplish manufacturing goals by communicating job expectations and setting up daily/weekly/monthly objectives to production team.

  • Review processing schedules and production orders and make decisions regarding resources needed to meet those schedules or orders.

  • Organize workflow by assigning responsibilities and preparing schedules.

  • Ensure all sections are following all safety and quality procedures and guidelines.

  • Check production output according to specifications.

  • Submit reports on production performance and progress.

  • Monitor equipment calibration dates.

  • Ensure the safe use of equipment and schedule regular maintenance.

  • Ensure that production line is effectively and efficiently maintained and suggest improvements.

  • Provide explanation and corrective actions for missed goal.

  • Check material to see if it conforms to the company specifications.

  • Report materials shortages and plan to overcome it.

  • Ensure materials are received early by all sections to meet weekly plans.

  • Provide proper trainings and educate assembly staff on effective way of assembling gensets.

  • Monitor production operations to ensure that it complies with quality and safety standard of the company.

  • Enforce policies, procedures are followed and orderly assembly floor is maintained.

  • Ensure good understanding and interpretation of engineering drawings and plan layout specifications by sectional supervisors.

  • Coordinate with Maintenance department on daily and future maintenance priorities and other engineering projects.

  • Develop reports in AX/DOLPHIN to track and move material throughout the Departments to support on-time delivery.

  • Document the production process and calculate manufacturing cost in order to identify areas that needs improvement and work accurately to estimate the cost of future project.

  • Supervise all production assembly activities and offer feedback and instruction to all staff regarding productivity and quality improvement.

 

Minimum Requirements:

  • BE. Mechanical or Electro-Mechanical.

  • Min 7-8 years of proven work experience as production supervisor in the assembly line.

  • Diploma in Process Engineering is a plus.

Field Electrical Engineer (After-Sales Division) - Ibadan

Duties

​Inspect, install, commission, test, troubleshoot and perform preventive and corrective maintenance on DG electrical system, Charging & Main Alternators, Automatic Transfer Switches and Control Panels.

 

  • Inspect, install, commission and troubleshoot of faulty DG electrical system, Charging & Main Alternators, Automatic Transfer Switches (ATS) and Control Panels.

  • Perform preventive and corrective maintenance on complete DG Electricals, Control panels and Automatic Transfer Switches (ATS).

  • Conduct routine inspections, servicing and make modifications to electrical systems of IC engines, generators and associated equipment.

  • Assemble, install, configure, test & troubleshoot electrical system components such as Gen Control Modules (DCP, Power Wizard, EasyGen, etc.), AVRs, Charging Alternator, Starter Motor, Electrical Lift Pump, ATS modules (Deep-sea, Intelilite, Lovato), synchro with multiple DGs & Grid Power for auto-interchange.

  • Handle all Test Equipment, Hand Tools, Apparatus and Components related with electrical systems parameters of the generators and other products of the company.                                                        

  • Correct wiring connections/modifications related to generator electrical system, circuit breakers, transformers or other component complying with standard specifications & codes.

  • Perform load assessment, balancing at sites and testing of electrical system components to identify possible faults & prevent wet stacking.

  • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and standard codes.

  • Write reports, obtaining customer signoff, snap pre & post pictures in line with the job requirement, send emails, communicate with line managers & call center before leaving any site after job completion.

  • Conduct basic mechanical work such as replacing/ topping engineer oil, replacing/ washing of oil & fuel filters, replacing/ cleaning of air filter, washing of radiator and gensets canopy external & internal, disposing the waste as per company policy, etc.                             

  • Check daily and conduct periodic maintenance of assigned vehicle in line with company process & manufacturer’s catalogue.

  • Check daily and maintain all assigned company assets, tools & PPEs.

  • Comply strictly with company processes related with QMS, OHAS & EHS policies.

  • Candidate should be an experienced professional who is detail-oriented with demonstrable creative writing skills

  

Minimum Requirements:

  • Diploma or BE. Electrical, Mechanical, Electro-Mechanical or equivalent.

  • Min 3-5 years of experience in site electrical operations in a leading industrial company with a strong experience in Power Supply/Generators industry.

  • Must be ready to relocate to other Zones/ Areas/ Regions based on business needs. Must be able to drive

Mechanical Technician (Field Mechanical Officer) - Lagos

Duties

  • Inspect, install, commission and troubleshoot of faulty DG mechanical system, Engine components, fuel & cooling system components, exhaust & gensets canopy components.

  • Perform preventive and corrective maintenance, Top and major overhauling of DG Engine, Fuel system,

  • Cooling System, Exhaust System & Canopy with associated components.

  • Conduct routine inspections, servicing of gensets and make modifications to mechanical systems of IC engines, generators and associated equipment.

  • Assemble, install, configure, test & troubleshoot mechanical system components such as Generator Engine system, Injector Pump, Nozzles, Atomizers, Lift Pump, Radiator & components, Fan & Fan belt and fan assembly components, air intake an exhaust system component, Gensets canopy and other associated mechanical parts, sub-assemblies, etc.

  • Handle all Mechanical and Hand Tools, Apparatus and Accessories related with Mechanical systems servicing & maintenance of the generators & other products of the company.

  • Correct technically assembly/modifications related to generator mechanical system, engine, fuel system, cooling system, exhaust, other mechanical sub-assemblies and components complying with standard service and maintenance procedures.

  • Execute in field top overhauling of diesel gensets engines as a result of gensets ageing or due to major faults.

  • Plan layout and install gen mechanical system, equipment and fixtures, based on job specifications and standard codes.

  • Write reports, obtain customer sign-off, snap pre & post pictures in line with the job requirement, send emails, communicate with line managers & call center before leaving any site after job completion.

  • ·Conduct basic electrical work such as checking and adjusting parameters in Gen control module, checking/replacing/ repairing of charging alternators, Starter Motors & Electrical Lift Pump, checking sanity of AC & DC wiring between control panel and main alternator as well as up to the load termination point, site load assessment, etc.

  • Check daily and conduct periodic maintenance of assigned vehicle in line with company process & manufacturer’s catalogue.

Minimum Requirements:

  • Graduate, Mechanical Engineering . MBA or master’s degree preferred.

  • Min 3-5 years  experience as a Mechanical Field Service Engineer in a Generator Assembly or servicing company.

Electrical Sales Engineer - Lagos

Duties

  • Present, promote and sell Company’s products and services to existing and prospective customers. seek out new sales prospects through cold calling and networking.

  • Conduct appropriate presentations on Company’s products and services.

  • Help in improving Company’s brands awareness.

  • Liaise with other departments and ensure the availability of stock for sales.

  • Ensure prompt delivery of Company’s products and services as soon as orders are payments are made.

  • Negotiate and close sales deals by agreeing on the terms and conditions of the contact.

  • Follow up on after sales activities in order to ensure customer satisfaction.

  • Communicate new product development and prices to new and existing clients.

  • Build strong, long-lasting customer relationships by collaborating with customers and understanding their needs.

  • Identify products and services improvements by remaining up to date on industry trends, market activities and competitors. Collect market information and conduct competition analysis including product and price comparisons.

  • ·Assist with client retention and business development, conduct research, process quotations and tenders, receive payments and organize delivery documentation of the finished product, process orders through company’s internal system.

  • Analyze the markets potential, track sales and status reports.

  • Prepare and submit reports on customer needs, complaints, inquiries and determine potential solutions.

  • Provide L1 support resolutions to clients issues.

  • Understand products components and parts.

  • Ability to resolve minor electrical issues.

  • Offer pre-sales services to clients, pitch technical presentation on products.

  • Prepare reports of sales activities including sales orders, backlog, forecast, lost accounts. Prepare and submit sales reports as requested.

Minimum Requirements:

  • Graduate of Business Admin, Mechanical/Electrical Engineering or related courses.

  • MBA or master’s degree preferred.

  • Min 3-5 years’ experience as an Electrical Sales Engineer, Technical Sales Engineer in an organization that sells UPS or similar products.

Trailer Drivers - Lagos                                                               

Duties

  • Transport Company’s products over land to and from manufacturing plants, branches and other specified areas.

  • Inspect the trailer before and after the trip, and record any defects found.

  • Report serious mechanical problems to the appropriate personnel.

  • Ensure that any cargo transported is fully secured to the trailer, using blocks, chains, covers, or ropes.

  • Ensure that transportation meets safety compliance and regulations.

  • Drive for long periods, carrying out long-distance deliveries, adjusting to driving conditions appropriately and safely.

  • Load and unload materials or products, prepare delivery papers, and keep records of his daily tasks.

  • Obtain receipts or signatures for delivered goods.

  • Collect delivery instructions from appropriate sources, verifying instructions and routes.

  • Read and interpret maps to determine vehicle routes.

  • Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.

  • Strong knowledge of applicable heavy duty truck driving rules and regulations

  • Hands on experience with electronic equipment and software such as GPS

  • Ability to drive long distances and travel regularly

  • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc...)

  • Strong knowledge of road maps

  • Time management skills

  • Ability to work under pressure

  • Able to meet deadlines

  • Report vehicle defects, accidents, traffic violations or damage to the vehicles.

Minimum Requirements:

  • High school degree or equivalent.

  • Min 3-5 years of experience as a Trailer Driver.

  • Having a valid Trailer professional driver’s license and good driving record with no traffic violations.

TV, AC and Refrigerator Assembler (Lagos)

Duties

  • Read and comprehend instructions and follow established procedures

  • Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device.

  • Check output to ensure highest quality

  • Report on issues, malfunction or defective parts

GET ON OUR NEWSLETTER LIST 
  • White Instagram Icon
  • Twitter - White Circle
  • Facebook - White Circle
  • YouTube - White Circle
  • LinkedIn - White Circle
  • Google+ - White Circle
NDIC –Sageto Limited

5 Elevators 1600KG, 17 stops, 2m/s 1 Elevators 1000KG, 17 stops, 2m/s 1 Elevators 1275KG, 17 stops,2m/s